GY6 125 150cc Scooter Center Main Stand, Kinlang

Based on years of experience in producing accessories for GY6 models, GY6 125 150cc Scooter Center Main Stand, Kinlang product iteration is mature, with no process shortcomings and better quality assurance; As a directly operated factory, Max Trading has abundant production capacity, fast delivery speed, and stable and continuous supply. There is no need to worry about delays or delivery issues, and it can quickly respond to customer order demands.

1. Fine surface craftsmanship, rust and corrosion resistance

1.1 High end electrostatic powder coating process, the paint surface is firm and does not peel off

GY6 125 150cc Scooter Center Main Stand, Kinlang adopts electrostatic powder coating technology as a whole. Compared with ordinary liquid spray painting, the powder coating thickness is uniform, the coverage is better, the paint surface is full, and the glossiness is moderate. Based on the principle of electrostatic adsorption, the adhesion between the paint film and the steel pipe substrate is strong, and it is not easy to have problems such as peeling, paint peeling, cracking, mottled and peeling. Daily riding, collision, cleaning and friction will not damage the paint surface.

1.2 Multiple anti-corrosion processes, fearless of outdoor wind and rain erosion

After undergoing standardized degreasing and oil removal, acid pickling and rust removal, high-temperature solidification and other pre-treatment processes, the steel surface micropores are sealed to isolate corrosion. Specially optimized for harsh usage scenarios such as long-term outdoor parking, rainy and humid areas, and dusty road conditions, to enhance overall rust, oxidation, and corrosion resistance, with a service life far exceeding that of ordinary products of the same type.

1.3 Fine polishing of all details, exquisite workmanship without defects

GY6 125 150cc Scooter Center Main Stand, Kinlang corners, welding seams, installation holes, and floor support points have been manually polished to remove sharp edges and corners, resulting in a neat and delicate overall workmanship. Avoid scratching or damaging body parts during installation and use, and prevent paint cracking caused by stress concentration at corners. Ensure high-quality details while balancing practicality and aesthetics.

2. Made of high-strength materials, sturdy and durable

2.1 Thickened carbon steel pipe material, load-bearing and compressive strength

The product uses thick and high-quality carbon steel pipes as the main material, with uniform wall thickness, high material density, and strong rigidity, which enhances the product's load-bearing and compressive capacity. It can easily bear the weight of GY6 125cc and 150cc scooters. Long term parking, vehicle load parking, and slight road bumps and squeezes will not cause dents, bends, or deformations in daily life.

2.2 Integrated welding process, stable structure

As a popular scooter main center stand, it adopts an integrated bending process with no splicing breakpoints, and the overall framework is coherent and stable. The key stress points are reinforced to effectively avoid the problems of solder joint detachment and loose structure after long-term stress. Frequent expansion and contraction, support under stress will not cause looseness, fracture, or welding failure, and the overall structure has both toughness and stability.

2.3 Scientific structural design, wear-resistant and anti-aging

GY6 125 150cc Scooter Center Main Stand, Kinlang precisely reserves standard spring hanging points, anti slip pedal lever, and bottom foot pad installation positions, all of which conform to the original vehicle assembly logic and force angle. The car owner's takeoff and landing operation is smooth and effortless, with effortless stepping and no lag when returning. The parking support is stable and does not shake. Long term use will not result in aging or loosening of accessories, support failure, etc., and the repair rate is extremely low.

3. High model adaptability and wide compatibility

3.1 Compatible models

This product is a highly adaptable universal GY6 engine main stand, specifically designed for GY6 platform 125cc and 150cc four stroke scooter motorcycles. The product compatibility coverage is extremely wide, perfectly compatible with mainstream brands such as Jonway, JMstar, Roketa, Sunl, Taotao, Baotian, etc. 125cc/150cc scooters at home and abroad, and fully compatible with 152QMI, 157QMJ all series GY6 engine models. As a scooter center stand replacement, this product is suitable for kinds of usage scenarios such as motorcycle wholesale, e-commerce retail, and offline repair store replacement. It is a highly compatible and preferred accessory for GY6 scooter replacement and bulk order.

Product Parameter:

FAQ

A1: What is the minimum order quantity (MOQ)?

Q1: The factory supports sample service, sample is available. Large scale procurement can offer tiered discounts and fit to various needs of overseas sellers.

A2: How long does it take to ship?

Q2: Normal goods can be shipped in 5 days, with enough production capacity for large orders. We can organize production and delivery on the basis of customer requirements to avert postpone.

A3: What shipping methods are supported?

Q3: It support multiple shipping methods： express delivery, logistics, sea freight, air freight, and land freight. It is necessary to match the order quantity and receiving area.

A4: Is the product fit for all GY6 models?

Q4: Universal compatibility for all GY6 125 150cc four stroke scooters, standard hole position, no need for modification.

Max Trading warehouse