Bajaj CT100 Camshaft With Bearings For Boxer 100 Platina 100

Max Trading insists on producing every motorcycle engine component to high standards. The Bajaj CT100 Camshaft With Bearings For Boxer 100 Platina 100 has a high surface hardness, high temperature resistance, wear resistance, and strong deformation resistance, which avoids the problem of cam wear during high-speed engine operation and significantly improves the durability and service life of the entire machine. It is the preferred cost-effective product for maintenance, replacement, and foreign trade matching.

1. Higher hardness, more wear-resistant, and longer service life

1.1 Preferred alloy substrate, material performance far exceeds ordinary accessories

This high performance motorcycle camshaft carefully selects high quality alloy materials as the base material, which is different from ordinary gray cast iron and low quality recycled steel accessories on the market. The raw materials received multiple layers of screening and purification treatment upon entering the factory to avoid problems such as material looseness, impurities, and insufficient toughness. The overall microstructure of Bajaj CT100 Camshaft With Bearings For Boxer 100 Platina 100 substrate is uniform and compact, with high strength and toughness, preventing common faults such as camshaft fracture, edge breakage, deformation, etc.

1.2 Professional hardening process, hardness meets the standard

The product adopts surface cold hardening technology, which precisely hardens the working surface of the cam core to create heavy duty camshaft durability quality, achieving the optimal layering effect of surface and core performance. The surface of the cam is hard and wear-resistant, and the core is tough and impact resistant, suitable for the working environment of high-speed engine operation and frequent start stop.

1.3 Durability testing, adapted to complex riding environments

All Bajaj CT100 Camshaft With Bearings For Boxer 100 Platina 100 finished products undergo multiple destructive tests such as abrasion cycle testing, high-temperature aging testing, and compressive deformation testing before leaving the factory to verify the comprehensive performance and durability limit of the product. Even if the engine is continuously running at high speed and high load for a long time, the cam working surface is still less prone to wear and peeling, dimensional deviation, and structural looseness, effectively reducing the rate of internal component wear and tear of the engine and reducing the maintenance cost of frequent maintenance and replacement.

2. Excellent engine adaptation performance, stable control, and improved operational quality

2.1 Precision machining to achieve valve timing control

As the core key component of engine valve transmission, this camshaft adopts CNC integrated precision machining technology, and the overall machining dimension error is precisely controlled within ± 0.03mm. Core parameters such as cam lift, base circle diameter, shaft concentricity, and keyway position are benchmarked against original factory standards to achieve nicety engine valve timing control. The structural parameters control the opening and closing angle and time of the valve, making the intake and exhaust process orderly and preventing faults such as unstable idle speed and valve misalignment caused by component accuracy issues.

2.2 Optimize fuel combustion efficiency, provide strong power, and reduce fuel consumption

The precise valve control capability enables this engine repair replacement part to scientifically optimize the intake and exhaust rhythm of the engine, achieving the optimal mixing ratio of air and fuel in the cylinder, and promoting full combustion of fuel. There will be no common problems such as power weakness, acceleration lag, weak acceleration, idle shaking, etc. that occur after the wear of old camshafts. Simultaneously improving the problem of insufficient fuel combustion, reducing excess fuel consumption, balancing power enhancement and energy-saving effects, and optimizing the overall riding experience of the vehicle.

2.3 High Fit, Silent Operation, Protecting the Engine

The Bajaj CT100 Camshaft With Bearings For Boxer 100 Platina 100 has a unified size standard and strong compatibility with the entire machine. After assembly, the clearance is evenly matched with the standard, matching the original factory structure, effectively weakening the vibration amplitude of the whole machine, suppressing abnormal noise during operation, and achieving a quiet and smooth operating state. With its comprehensive advantages of high adaptability, high stability, and high durability, this product is suitable for various scenarios such as overseas bulk procurement and offline repair store replacement. It is a high-quality motorcycle replacement product with extremely high cost-effectiveness.

Product Parameter:

FAQ

1. What is the minimum order quantity for the product?

The minimum order quantity for this product is 200 pieces. If other products are purchased together, the quantity can be adjusted.

2. Does factory support sample services? Can you provide free samples?  

We support sending samples, but the cost of the samples needs to be borne by the buyer. If you feel satisfied with our products in the future and place an order exceed the minimum order quantity, the sample fee can be deducted or refunded.

3. How is the product quality and how about solutions if there are quality issues?  

The product undergoes strict testing before leaving the factory. If there are any problems with the product, please contact our after sales service in time. We will provide a return or compensation plan in terms of the actual situation to solve the problem.

Max Trading's production line is stabilize, guaranteeing delivery efficiency

The factory has a standardized operating system for procurement, production, shipment, and after sales process. We keep pace with the times and support customized needs.